| View previous topic :: View next topic |
| Author |
Message |
Jigg Synergy Offroad Owner

Joined: 01 Feb 2007 Posts: 503 Location: North Shore, MA
2000 Chevrolet Blazer
|
Posted: Tue Nov 06, 2007 2:59 pm Post subject: Plans for next year? |
|
|
What do you guys have planned for mods for next year?
I'm thinking of:
-Sliders
-Rear winch (bought, just need to mount)
-Possibly 3" BL
-Front Stinger
-Wet Okole seat covers |
|
| Back to top |
|
 |
FObyFo247

Joined: 01 Feb 2007 Posts: 110 Location: Manchester, NH
2003 Chevrolet Blazer
|
Posted: Tue Nov 06, 2007 7:11 pm Post subject: |
|
|
Depending on the $$ and time:
BlaZeR2:
2" Body lift
15x8 Streetlocks
32x11.5 BFG A/Ts
Fixing smashed rocker
Fixing dented exhaust tips
Long AAL for rear
The Hulk:
Either level the front or 4" lift all the way around
Bigger tires, would love 35"s
Steering box brace
Finally get brakes done and have it inspected
Rocksliders
Ill probably get the stuff for the Blazer first because i am gonna need new tires for it next year and its my DD.  _________________ Life's Short, Drive Hard. |
|
| Back to top |
|
 |
GotZR2?
Joined: 23 Mar 2007 Posts: 23
2003 Chevrolet S10
|
Posted: Wed Nov 07, 2007 12:40 pm Post subject: |
|
|
Future plans for the Z...
Ditch the Safari Bar
Get a Pre-runner bar and re-mount the PIAAs.
T-bar crank (alignment also)
GPS
but of course this all depends on if i get a job or not  |
|
| Back to top |
|
 |
Jigg Synergy Offroad Owner

Joined: 01 Feb 2007 Posts: 503 Location: North Shore, MA
2000 Chevrolet Blazer
|
Posted: Wed Nov 07, 2007 1:15 pm Post subject: |
|
|
| Oooh... GPS, that's a good one! Might have to look into those. It'd definitely be useful for the sled. |
|
| Back to top |
|
 |
GotZR2?
Joined: 23 Mar 2007 Posts: 23
2003 Chevrolet S10
|
Posted: Wed Nov 07, 2007 2:14 pm Post subject: |
|
|
| ya my buddy got one for his car and its awesome.. plus i am getting sick of having to print off directions when i want to go places |
|
| Back to top |
|
 |
strong97blazer
Joined: 30 Oct 2007 Posts: 6
1997 Chevrolet Blazer
|
Posted: Thu Nov 08, 2007 12:11 am Post subject: |
|
|
2" body lift
re-do my interior (floormats & seats)
31's
some exterior body work on the back bumper & hitch
CAI
possibly shackles & .75"-ish tbar crank depending on how the 31's fit with just the 2" body lift.
oh yeah and late next year i would like to do something with the exhaust |
|
| Back to top |
|
 |
BWro03ZR2
Joined: 19 Apr 2007 Posts: 15
|
Posted: Thu Nov 08, 2007 12:42 am Post subject: |
|
|
| BDS Lift and tires for the truck and a MiniMed Pump for me...http://www.minimed.com:80/ |
|
| Back to top |
|
 |
Matt_AL
Joined: 12 May 2007 Posts: 16
1999 Chevrolet Blazer
|
Posted: Thu Nov 08, 2007 7:18 pm Post subject: |
|
|
My plans are to get my frist gen going this winter. Then I'm think about maybe doing a BL and some 33s. A hidden winch would be nice to.  |
|
| Back to top |
|
 |
mike13126
Joined: 06 Oct 2007 Posts: 31 Location: Oswego, NY
2001 Chevrolet S10
|
Posted: Sat Nov 10, 2007 4:17 am Post subject: |
|
|
Id like to get some sliders, off road lights and 33's for the Z.
For my 82 Chevy Id like to finish rebuilding the motor (currently 3/4 tore down) and get it back in to start my restoration on it.
Unfortunately everything depends on whether or not the money is there to do it. |
|
| Back to top |
|
 |
BlackPearlZ
Joined: 11 May 2007 Posts: 42 Location: Mesa, AZ
2001 Chevrolet S10
|
Posted: Sat Nov 10, 2007 9:29 pm Post subject: |
|
|
My plans start the same as ytou all....
First I gotta rob a bank...
I really want a set of sliders.
But first I gotta get this winch mounted behind the front bumper.
And I gotta fab up a rear hitch/shackle behind the rollpan.
Still considering a rack for the spare tire.
I need an audio upgrade.
And... most important of all... and most likely to actually happen....
NEW Arizona stripes on the paint! _________________ Rodger
the Black Pearl Z website |
|
| Back to top |
|
 |
Kevin S
Joined: 12 Feb 2007 Posts: 94 Location: Holland Michigan
2001 Chevrolet Blazer
|
Posted: Tue Nov 13, 2007 1:09 am Post subject: |
|
|
Ohhhh boy I have SO much planned. How much actually ends up getting done is a complete different story. LOL
Lets see this is going to be an essay practically.
- Tint
- Exhaust
- March Pullies
- AEM Brute Force
- Wheel Spacers
- New Tires
- Streetlocks
- EFILive
- Reverse Lights
- More Fog and Driving Lights (Hopefully a few sets mounted on roof and some on the mirrors/hood hinge area)
- Trimming
- Sliders
- Shackles
- AAL's
- Hopefully make a sweet bumper
- B&M Shift Plus
- Bunch of stuff to run and pull cooler
----- E-Fans
----- B&M Trans Cooler
----- Trans Temp Gauge
----- Maybe Deeper Trans Pan
- Either Rear Diff Guard or new cover (looks like Mag-Hytec)
- Hoping to get a Detroit Locker in there
- Exide Orbital Battery
- Headers
- Reciever tubes
- Goodmark Gen 2 Hood
- Definately gonna do another audio upgrade
----- Infinity Kappa Components Front and Rear
----- Infinity Amp to power them
----- Probablly gonna buy my friends Brand New 12" JL Audio W6's and 1000/1 JL amp for power
----- Dynamat and lots of it
----- Gonna have to get a bigger alternator for those too
- Paint my Dash and Door Handle surrounds - thinking spectra gray as red would look to ricer like
- Line-X Flares, Rockers?, and Bumpers
whatever I could go on and on and on. Im hoping to knock a good chuck of that off. I have a lot of "Preventative Maintenance" to do too - Like BJ's, Wheel Bearings, Brakes, Plugs and Wires, etc.
Honestly I dont know how much I will actually get done - it sucks being a College Student and having no $$. I also kinda want to buy a little Regular cab S-10 with the 4.3 and a 5-Speed so I gotta save for that. If I could find an Xtreme that would be cool - even a Blazer Xtreme.I want to run around to and from work and then school in that - better gas mileage less miles put on the Z, and then I dont have to worry about the Z being parked around campus. So I guess we will see what happens |
|
| Back to top |
|
 |
GotZR2?
Joined: 23 Mar 2007 Posts: 23
2003 Chevrolet S10
|
Posted: Tue Nov 13, 2007 1:06 pm Post subject: |
|
|
| kevin if you are trying to find a 2wd drive or blazer you should look at getting the 4-banger.. a little better gas mileage than the 4.3.. plus if its just a run around town kind of thing you shouldn't have to worry too much about the added power of a 4.3 |
|
| Back to top |
|
 |
tyhackman15

Joined: 21 Mar 2007 Posts: 19
2002 Chevrolet S10
|
Posted: Tue Nov 13, 2007 5:52 pm Post subject: |
|
|
Well i'll be hitting the big 100K pretty soon, so a tune-up is on the list for the Z.
But i'd like to get:
-32" Maxxis Bighorns
-Prerunner Bar
-Tint
-Stereo
Oh yeah, and sell my stock PA3's to get some cash. |
|
| Back to top |
|
 |
cknaffle
Joined: 01 Feb 2007 Posts: 28
|
Posted: Fri Nov 16, 2007 2:04 pm Post subject: |
|
|
| Rockwells and 49" Iroks. |
|
| Back to top |
|
 |
BWro03ZR2
Joined: 19 Apr 2007 Posts: 15
|
Posted: Sun Nov 18, 2007 11:23 am Post subject: |
|
|
| cknaffle wrote: | | Rockwells and 49" Iroks. |
Upgrading already? |
|
| Back to top |
|
 |
Kevin S
Joined: 12 Feb 2007 Posts: 94 Location: Holland Michigan
2001 Chevrolet Blazer
|
Posted: Wed Dec 12, 2007 12:46 am Post subject: |
|
|
Well I can cross the Pullies off the list, those came in the other day. Now I just need to rob a bank (or quit going to school ) and I can do the other stuff.
New tires will be reallly soon in the spring I decided. I want them for my road trip to Daytona for spring break. And Rims too. I did a little photoshopping (not good by any means) of the rims and the ideas. Tell me what you guys think.
They are the Streetlocks that Justin sells right here! The First one is the rims just like you get them.
Second one is what I am also thinking about. Taking the bolts on the outside edge off and either having them powdercoated (friends dad will do it cheap as hell or probablly free, anodized, or just painted to match my truck.
Sooo what do you all like?? |
|
| Back to top |
|
 |
GotZR2?
Joined: 23 Mar 2007 Posts: 23
2003 Chevrolet S10
|
Posted: Wed Dec 12, 2007 1:39 pm Post subject: |
|
|
| i think you should hold out and get some ZR5 rims personally.. i love mine |
|
| Back to top |
|
 |
Jigg Synergy Offroad Owner

Joined: 01 Feb 2007 Posts: 503 Location: North Shore, MA
2000 Chevrolet Blazer
|
Posted: Wed Dec 12, 2007 3:19 pm Post subject: |
|
|
I like 'em Kevin. Pretty good chop too!
I think the red goes well with your blacked out theme too. |
|
| Back to top |
|
 |
mike13126
Joined: 06 Oct 2007 Posts: 31 Location: Oswego, NY
2001 Chevrolet S10
|
Posted: Wed Dec 12, 2007 8:58 pm Post subject: |
|
|
Definatly go with the red, Kevin. Looks great that way.  |
|
| Back to top |
|
 |
rennat_2006
Joined: 01 Feb 2007 Posts: 15
2000 Chevrolet Blazer
|
Posted: Sat Dec 29, 2007 2:38 pm Post subject: |
|
|
Fix both inner CV boots(You sell these Justin?) that have started to leak since i cranked the t-bars 2 weeks ago!
Fix the leaking drivers side axle seal.
Those are the highest priority and need to be done here sometime quick.
As far as mods there is quite a few but it all depends on funding. _________________ 2000 Blazer2 |
|
| Back to top |
|
 |
drmrman
Joined: 20 Nov 2007 Posts: 21
|
Posted: Sat Dec 29, 2007 3:28 pm Post subject: |
|
|
Everyones plans SOUND GREAT!
Mine are more of a maintnance issue...
Just rolled 60K miles and Im going to do an overall tune up...
Plugs
wires
ball joints
tie rod ends
idler arm
pitman arm
The fun stuff. As of 10 min. ago I bought add a leafs because I sag badly.
And Im trying to order some smaller lights from jigg to put on my roof rack that came in today!... We just have to discuss what he can get a hold of and what he cant!
Otherwise I think Im done. The rest of my money is going into the vette.
Heads cam/pro charge. package.
drmrman |
|
| Back to top |
|
 |
|